LPSG

Plaster Cast your Cock?

emilywee: My bf and I are searching the net to make a buying decision on a plaster cast for his cock. He is going to be traveling for work soon and wants to leave me

is part of a discussion in the New Member Introductions forum that includes topics on Introduce yourself, everyone here was once new to the LPSG!.


Go Back   LPSG > Main > New Member Introductions

 
LinkBack Thread Tools
Old 03-23-2003   #1 (permalink)
Imported is offline

Plaster Cast your Cock?

emilywee: My bf and I are searching the net to make a buying decision on a plaster cast for his cock. He is going to be traveling for work soon and wants to leave me with a little trophy while he's away. Has anyone done this before and do you have recommendations on what kit to get and from what retailer? How well do the casts come out, and can you make dildos and such out of them?
Imported is offline  
Old 03-24-2003   #2 (permalink)
txquis is offline


My bf and i talked about this as well,
and ended up not doing it.
For one thing, you have to keep your dick hard
in the cool plaster for quite awhile...hmmm...viagra could help that i guess, haaaaaaa

If you find out...send details
txquis is offline  
Old 03-24-2003   #3 (permalink)
Imported is offline


BiteSize: Yes, I've done it. Twice, in fact. The first time was with a ready-made kit which wasn't suitable because the cylinder that they give you to enclose yur dick (to make the female mould) didn't give enough wall thickness so the cast sprouted hernias and leaks. (Hopefully the real-life original has a couple of years to go before it starts doing that.) They also give you plaster of Paris as a casting material which takes 10-15 minutes to go off and plays merry hell with your public hair.

The superior home-made solution was to use a 1.5 litre plastic water bottle with the neck hole enlarged to enclose the shaft. A further refinement would be to shape the hole so it includes the scrotum, or part of it - the idea is to create a watertight seal. Cut off the other end of the bottle and pour in dental impression material. I've forgotten the correct name for this but it's made from seaweed and sets rubbery-hard within 3-5 minutes. You might not capture your best-ever stonker but pressing down with the bottle has a sort of cockring effect, so you stay hard and horny, and this also makes the best of your length. When the stuff goes hard (or when you go soft, whichever comes first) slip out and you're left with a perfect female impression from which you can make plaster or bronze casts, chocolate cocks, doorstops, ice cubes...
Imported is offline  
Old 03-24-2003   #4 (permalink)
Imported is offline


hungcuriousNC: I purchased the "Create-a-cock" kit once and tried that. It was going along fine at first. The instructions say to do it over newsprint or in a bathtub, I got in the tub. My b/f at the time mixed the solution as specified and I dipped my dick into the cup/mold container as specified. It had to be done within seconds of the powder and water mixing. The whole thing started gelling within seconds. The mixture was cold, and I was nervous of messing the kit up, so I ended up going semi right as I inserted my dick into the material. What part of a mold that I did get, I was going to work with, but when it came time to mix the actual material that the dildo was to be made of, one of the bottles was hard and dry inside. So, the whole thing was a waste. I would love to try it again, but I suggest 3 people. One to mix the solution and get it all ready for the actual molding since it takes so little time to start setting up, your lover/bf/or gf to keep you hard, distracted and turne on , and of course yourself to become the star. If I had made the actual molding, I was going to keep it myself. What a turn on to see a dildo of your own dick. LOL
Imported is offline  
Old 03-24-2003   #5 (permalink)
Imported is offline


wvu_kerq: wow im glad no ones ever asked me to do a plaster mold of my bits and pieces! well... i did do a plaster mold of my breast, but it was for an art project, i turned it into a valkarie (sp?) breast plate. never the less, it was messy and peeling it off HURT! gents i dont envy you and i recomend that you shave first or else you will pull out all those poor little hairs.
Imported is offline  
Old 03-24-2003   #6 (permalink)
Imported is offline


AnonyMs: [quote author=wvu_kerq link=board=meetgreet;num=1048481319;start=0#4 date=03/24/03 at 05:57:54]i recomend that you shave first or else you will pull out all those poor little hairs.[/quote] Whoooooaaaaa! Great tip, wvu!
Imported is offline  
Old 03-24-2003   #7 (permalink)
Imported is offline


hungcuriousNC: Actually, the kit that I used was specificallly designed for this process. It did not pull or even tug on any of my pubes. I'm sure making a plaster mold would definitely pull them though. Might I suggest using vaseline before casting?
Imported is offline  
Old 03-24-2003   #8 (permalink)
Imported is offline


theratking: Where did you purchase the dental impression material?
Imported is offline  
Old 03-24-2003   #9 (permalink)
jonb is offline


Well, here ya go, str8 from PortalOfEvil:

http://www.cloneyourbone.com/

You can also get a Match Your Snatch for him while you're there.
jonb is offline  
Old 03-24-2003   #10 (permalink)
ericbear is offline


There are actually many suppliers of casting kits. *Here are a few sold specifically for the penis:

http://www.sensuousliquidlatex.com/prod08.htm

http://www.createamate.com/createamate.htm

http://www.artmolds.com/gateway/kits/intimate_kit.htm

http://www.castingwilly.com/homepage.htm

http://www.mould-a-willy-kit.com/

Most better art supply stores carry body part casting kits. *The ones designed for hands will work for a cock, porvided you are not too long.

Finally, Morningwood Labs will handle the casting process for you, once you have created a mold. *They use your mold to create a more durable one, and will then use this to cast sex toys in a variety of materials, etc. *The even offer a dick-of-the month club. *For a $250 annual membership, they will send you a cast of a selected dick each month.
http://www.morningwoodlabs.com/
ericbear is offline  
Old 03-25-2003   #11 (permalink)
Imported is offline


gigantikok: that'd be pretty wierd, eating a chocolate replica of my cock. Then again, that'd be alot of chocolate... ::)
Imported is offline  
Old 03-25-2003   #12 (permalink)
B_DoubleMeatWhopper is offline
Banned


Alginate will not stick to hair, but can only be attained from a dental supply house. InstaMold®, which is available at most craft stores, is an excellent casting medium. Cover your cock with the InstaMold and then reinforce it with plaster bandage to give the mold rigid support. Fill the mold with plaster of Paris (shake it so you don't end up with air bubbles) and let the plaster harden. You can use the plaster replica to make any future molds.

Ars longa, vita brevis: CARPE SCROTUM!
B_DoubleMeatWhopper is offline  
Old 03-25-2003   #13 (permalink)
B_DoubleMeatWhopper is offline
Banned


BTW .. you can use the plaster cast of the cock to make a plaster mold ... or, better yet, a dental stone mold. This can be used to make a dildo. You can't pour latex directly into InstaMold. And make sure you use casting latex; other types of liquid latex are not suitable. And plaster or dental stone molds can be used to make cool cock-shaped candles and soap!

Ars longa, vita brevis: CARPE SCROTUM!
B_DoubleMeatWhopper is offline  
Old 03-25-2003   #14 (permalink)
Imported is offline


BIGBOYDAVE: How do u get it off if you are thicker in the middle of the shaft than at the pubes
Imported is offline  
Old 03-25-2003   #15 (permalink)
B_DoubleMeatWhopper is offline
Banned


Even after it solidifies, InstaMold is very flexible. You can carefully pull your cock out of the mold and the InstaMold will retain the proper shape. I speak from experience.

Ars longa, vita brevis: CARPE SCROTUM!
B_DoubleMeatWhopper is offline  

Tags
cast, cock, plaster

Thread Tools



All times are GMT -4. The time now is 09:10 AM.

Latest Threads
who is this
4 Minutes Ago by buzzth
Unhung hero
40 Minutes Ago by amadeu
Christine futa girl
44 Minutes Ago by Puffa
Undefeated
53 Minutes Ago by godcoc
spaced out
59 Minutes Ago by MASSIV

Latest Posts

Latest Blogs

On Cam Now
bigboules, Buckeye1980, drew, godcock, lincoln1019, OpusCock, ParkerCute, RateMe27, ricanshooter, ScotRandom, t9, TheFree, xvi45v

Please read the rules.

Online: 1992 | Chatting: 62

Sponsors

Copyright 1999-2013 LPSG