LPSG

fitting a cock ring

so... how do I measure for size to get a cock ring? how do you put yours on... cock first or one ball at a time and then....??

is part of a discussion in the Underwear, Clothing, and Appearance Issues forum that includes topics on What to wear (to show or not to show), what's comfortable, what's not....


Go Back   LPSG > Main > Underwear, Clothing, and Appearance Issues

 
LinkBack Thread Tools
Old 09-17-2011   #1 (permalink)
D_Tess_Tease is offline
Account Disabled

fitting a cock ring

so...
how do I measure for size to get a cock ring?

how do you put yours on... cock first or one ball at a time and then....??
D_Tess_Tease is offline  
Old 09-17-2011   #2 (permalink)
zero_ga is offline


1/78 to 2 inch is normal one ball through at a time then the cock flacid of course
zero_ga is offline  
Old 09-17-2011   #3 (permalink)
B_enzia35 is offline
Banned


There's guides around the net. But here's a quick way to do it.
Get a seamstress tape and measure around your cock and ball sack. From the top of the penis to the underside of the sack. Measure that length, then divide by pi. That should be the approximate size you need. I use a 2" in my picture.

Installation:
dab a bit of lube on the inside of the ring, then slip in one ball, then the other, then fold your penis into whatever space is left. Obviously needs to be done when flaccid.
B_enzia35 is offline  
Old 09-17-2011   #4 (permalink)
red7.5 is offline


yep, ball-ball-cock is the way to get it on.

If you PM me, want to befriend me or want to chat please have pics posted.
red7.5 is offline  
Old 09-17-2011   #5 (permalink)
D_Tess_Tease is offline
Account Disabled


im a bit worried that I might not get it off!!!
D_Tess_Tease is offline  
Old 09-17-2011   #6 (permalink)
PurpleThrillHammer is offline


How do you get a metal cockring off? I'm afraid to try one, what if my dick stays hard and I can not get it off! I know such a novice question , but i never used a metal cock ring before.

6.25"L x 6.5"G yes more girth than length
PurpleThrillHammer is offline  
Old 09-17-2011   #7 (permalink)
zero_ga is offline


Plenty of lube and it can be done just dont get one to small
zero_ga is offline  
Old 09-17-2011   #8 (permalink)
vibrationzzz is offline


Quote:
Originally Posted by PurpleThrillHammer View Post
How do you get a metal cockring off? I'm afraid to try one, what if my dick stays hard and I can not get it off! I know such a novice question , but i never used a metal cock ring before.
Have a small set of bolt cutters handy. :) If you visit your local hardware or one of the majors there should be a section of stainless steel fittings and fixtures etc...among them you will find stainless steel rings of varying sizes plus other stuff, pipe and rope clamps, d-clamps, hooks etc at reasonable prices........Just don't try things out in the middle of the store :).... and take your imagination with you.

p.s. Try an adjustable clamp first, it should give you some idea of size.

Last edited by vibrationzzz; 09-17-2011 at 10:51 PM..
vibrationzzz is offline  
Old 09-18-2011   #9 (permalink)
D_Skippy_Skidmarx is offline
Banned


I was afraid of metal rings at first until I wore one, finally settling on a 2 1\8" diameter cockring. I wear it 24/7 but not when cycling. If you want to take it off while you are still hard run cold water over your cock. That works for me everytime. Remember, if it hurts it is too small. I love mine, the weight, the way it looks, it is just cool! Go look in my gallery at my cockring.
D_Skippy_Skidmarx is offline  
Old 09-18-2011   #10 (permalink)
Silvertip is offline


What I found useful in determining the best size for a cock ring was to get an assortment of rubber O-rings (as seen in the attached photo) with which to experiment. They cost less than a dollar apiece, are available at local industrial supply stores and they function well enough to illustrate precisely what you can and cannot get into, out of, etc. Also, they're easily cut with nippers in the unlikely event you were to get into something you couldn't get out of.

Once you know what size works for you it's equally easy to experience the upgrade to a more rigid cock ring by purchasing Teflon™ O-rings of the appropriate size. They only cost a dollar or two apiece and can be ganged (as in the attached pic) to function like one of the wider metal rings.

With a bit of doing I can get into and out of just about any cock ring with a 2 inch i.d. But when I decided to invest in a heavy stainless steel cock ring I ordered one with a 2-1/8 inch i.d. just to be sure there would never be a problem with getting stuck in the damned thing. You can see by the attached pic that trying to get out of it with a "small set of bolt cutters" could be quite hazardous to my health and comfort. In spite of the larger i.d. once I'm erect it grips tightly enough to enhance the strength of my erection

One of my favorite cock rings, again in 2 inch i.d., is a wide ring of pure silicone. Because of its width (over 3/4 inch) it is difficult for me to get on and off in the conventional manner, but it is stretchy enough that I can pull it open with both hands and drop my stuff through it. Once on, it has a nice tight grip on the base of my genitals and functions well for the purpose.

Hope that helps.

ST
Attached Images
File Type: jpg Rubber.jpg (45.1 KB, 329 views)
File Type: jpg Teflon.jpg (69.5 KB, 339 views)
File Type: jpg StainlessSteel.jpg (74.0 KB, 350 views)
File Type: jpg Silicone.jpg (73.7 KB, 304 views)

If God had intended us to run around without our clothes on we'd have been born naked.
Silvertip is offline  
Old 09-18-2011   #11 (permalink)
jojolongdong is offline


Quote:
Originally Posted by thickpig01 View Post
im a bit worried that I might not get it off!!!
I just slip it down the shaft and then there's no danger.!
(I advise not using a metal ring if you're going to insert your balls.)

jjlngdng
jojolongdong is offline  
Old 09-18-2011   #12 (permalink)
dpe01 is offline


Quote:
Originally Posted by thickpig01 View Post
so...
how do I measure for size to get a cock ring?
how do you put yours on... cock first or one ball at a time and then....??
There's a stretchy one called I think "Julian's Stud Ring" which is adjustable and easy to get on and off, even when hard. You could try this - it's good in its own right, but by adjusting this to the right size, you might also help figure out what size to get in a metal ring.

For me with a metal one it's cock through first, then one ball then the other ball, but whatever works for you.

If you need to get it off, just think about doing your tax return, or taking out the garbage, or whatever doesn't work for you!
dpe01 is offline  
Old 12-30-2011   #13 (permalink)
D_Tess_Tease is offline
Account Disabled


well I ended up with a 2" and yes.. cock first, then my balls. luv the feeling of them being popped thru the ring. also makes me really horny and I gain about 1/2 inch in length sometimes from being so horned up and full of blood..
D_Tess_Tease is offline  
Old 12-30-2011   #14 (permalink)
bigpenis is offline


Do you have to go commando with a cock ring?
bigpenis is offline  
Old 12-30-2011   #15 (permalink)
D_Tess_Tease is offline
Account Disabled


Quote:
Originally Posted by bigpenis View Post
Do you have to go commando with a cock ring?
yeah, feels awesome and gives me a nice bulge in my summer shorts.
also the feeling of a jock strap and ring really makes me big.
D_Tess_Tease is offline  

Tags
cock, fitting, ring

Thread Tools



All times are GMT -4. The time now is 12:51 AM.

Latest Threads

Latest Posts

Latest Blogs

On Cam Now
Bulluc, hoodedcock, hornyguycam1992, hungblacksexy, inches, joted41, neoman847, REACTIONLOVER14, reallyfatcock, Ricochet, StasC2C, tysonzzz, udubcrew, YoungItalian

Please read the rules.

Online: 1862 | Chatting: 62

Sponsors

Copyright 1999-2013 LPSG