Clone cock

Get your latex alginate, plaster of Paris, mixing tool (I use a squirrel cage type, but a whisk will also work or even a kitchen beater) put down some drop cloth or plastic. A few plastic pails of any sort, some clean warm water, some vaseline or mold release grease and you're ready to start.
You must be STIFF and remain so for a few minutes during the procedure, you can use a cock ring, but I prefer viagra. Mix the latex quickly and plunge your erection in for about 90 seconds or until the latex sets. Carefully remove your cock and quickly mix the plaster of Paris and pour it into the mold you just made. It will set in minutes and you can peel off the latex and let the plaster cock dry overnight.

Comments

Blog entry information

Author
Markerweeks
Read time
1 min read
Views
222
Comments
2
Last update

More entries in General

More entries from Markerweeks

  • Alginate
    Latex alginate gives excellent detail and is inexpensive. It must be...
  • Smooth-on.com
    I bought most of my casting and molding materials from Smooth-on.com...
  • Plaster casting
    The cheapest way to cast your cock is with latex alginate and plaster...

Share this entry