Clone A Willy Failure 4x.

Posts Attachments
Sort by date Most Liked Posts
P

Penisjokesarenotfunny

Experimental Member
Media: 0
Joined
Apr 10, 2006
Posts
105
Media
0
Likes
13
Points
238
Gender
Male
Not joking I'm $205 in, nothing to show for it.

Here is the major problem, somehow magically after stirring the stuff I'm always soft and too stressed/nervous to get hard again. I can't fucking figure it out. I even tried $15 per two Hard - 4 - Hours or whatever things they sell at the same place as the Clone A Willy.

My deadline is Friday when I have to have this turned into a mold for a metal pour. Basically I have to let this kit set overnight, create a mold for it, pour wax into that, carve the underside of the wax (penis), make a mold of that, and then make three. Then after I've made three I'll be making another mold that the metal pours into.

Seriously not sure how I'm going to get this done now.
 
Thought a g/f would be helpful but I'm on my own at the moment. Visuals etc don't help. There isn't enough time anyhow. The window is 2 minutes and it takes a good minute to get the shit stirred (doesn't stir that easy). Plus the last time I did it, it was like a degree over 98 or so, not much, but if it is over at all it won't set even in 4 minutes. If it is at 98, it'll pretty much set right away at 2 mins.

These are incredibly hard to do. To get the base shape right I've had to reduce the hole size so the skin doesn't fluff up. They'd be a lot easier for someone who isn't larger than average.
 
The funny part is I might still cum from trying to get it hard again before I insert. I don't have to be hard for that to happen, but I certainly don't want it to because it screws up the stuff (foreign liquids).
 
Pretty sure these mould kits use plaster of paris to mate the initial mould, so I would assume if I am right on this, you can pick that up from any arts supply store.

Certainly seams logical, in that when you watch shows like Mythbusters who are used to crafting their own custom parts (Sure I saw a show on the BBC with Louis Theroux, where he did a bit on mould-a-willy kit, and the Pro's use Paris for the main mould), they generally use Plaster Of Paris.

Only thing I would say, is you need to find a quick setting version of this, and probs some visual aids too, to keep you hard whilst it sets.
 
Last edited:
After you insert willy, at the 2 min mark the stuff will of formed to you, and at 4 minutes it is entirely safe to remove without fear of breaking any of it. After 2 hours it is safe to pour in the dildo materials you mix.

Plaster of paris can not do this.
 
Last edited:
Penisjokesarenotfunny said:
What I've noticed is that the original stuff when it is finished drying is not hard, it is actually pretty rubbery. This makes it so things can be pulled in and out of it without damage. It'll shrink after too long.

Would plaster of paris act that way? Regular plaster is hard as a rock so it'd be impossible to pull a positive dildo out of it. Plus I'd be scared of getting my dick out of regular plaster.
Click to expand...

The Plaster Of Paris is used to make a positive mould of whatever is placed in it, yet it's soft enough to break apart if needed.

Once made, you just fill with whatever material you wish in a liquid form, wait to harden, then just smash off the plaster.

In any case, when you go soft, you should to be just able to slip your cock out anyway, if you have difficulty getting it out whilst hard.

That is the way I understand most of these kits work anyway.
 
I'm looking at using alja safe from smooth on. It doesn't give a table for reducing the working time though, based on water temperature. It kills my erection when I'm in a panic, but I can't keep it forever either... not doing this anyway. Taking like a half of a Viagra or something would help, but I don't know how to get one. (afraid to take a full one).

It isn't that I can't use another kit, but I'm running out of money! I have some alja stuff but have to check if it is the safe one for skin.

Watching videos of alja-safe, I think it might be what is in the Clone A Willy kits. Well maybe, I'm confused because my last attempt the stuff didn't set at all, and it was a warming mixture. It can't be the same thing because the warmer alja-safe is, the faster it works...
 
Last edited:
KuronoB said:
Try a cockring, maybe a vibrating one. It should help keep you hard and stimulated.
Click to expand...

The problem is that it will show up in the mold. I don't want that. The intent is to get a final product that represents my full penis. (if my BPEL is 7.4", I want to get at least a good 7" for this, otherwise it isn't really an accurate mold of my cock, one failed attempt with a chubby is only like 6" and it just doesn't look like a full erection at all, you can tell with the extreme detail)

Alji-safe is looking good, but complicated.

http://www.penismolding.com/

As this states I don't have the snap-set. Without viagra I don't know if I could keep the situation what it needs to be. With it, I'd probably be fine right? I could mix a little hotter than 80*F, insert, wait somewhere less than 5 minutes. I assume, unless I make myself cum, my erection wouldn't be going anywhere even if I'm nervous?
 
Last edited:
stanmarsh14 said:
The Plaster Of Paris is used to make a positive mould of whatever is placed in it, yet it's soft enough to break apart if needed.

Once made, you just fill with whatever material you wish in a liquid form, wait to harden, then just smash off the plaster.

In any case, when you go soft, you should to be just able to slip your cock out anyway, if you have difficulty getting it out whilst hard.

That is the way I understand most of these kits work anyway.
Click to expand...

ABSOLUTELY DO NOT use plaster of paris. Plaster adheres to anything porous, it shrinks slightly as it sets, and it heats up as it sets. You DO NOT want that around your penis. Plus, it takes half an hour minimum to fully set, and if you pour the dildo materials into it, those materials will simply adhere to the plaster.

What you WANT is alginate. It's available through just about any theatrical makeup supplier.
 
Some time ago I made some clones of my cock using plaster of paris. It was sucessfull, after several failed trials I found good quality plaster of paris worked, using a theatrical make up removal cream on my erect cock as a release agent. Just put the erect cock in a suitable plastic tube so as to pour the plaster in from the top. If you wait untill the plaster is just about to harden then pour it in. The plaster then warms up as it hardens, this has an enjoyably arousing effect on the erection which beomes much firmer. Just need to hold the erection for ten minutes or so untill the plaster is hard, then the wait for the cock to soften sufficiently for its removal without damaging the mould.
Then I used simple washing up liquid in the mould to release the next stage of the process which was to fill the mould up with a stronger mix of plaster and wait for it to fullly harden - 24 hrs or so - and the break the original mould off leaving an exact reproduction of erect cock.
The resulting cast was very good with all the folds in the foreskin behind the glans and the shaft veins being reproduced in excellent detail.
It is essential to shave all the hairs from the base of the cock for obvious reasons.
Great fun!
 
You must log in or register to reply here.

Similar threads

LesterBangs13
Want to See Your Own Cock or Fave Porn Cock as a Replica Dildo?
Replies
63
Views
5K
Sex Toy Talk
wadeisgreat
wadeisgreat
T
It's a Wonderful Cock!
Replies
2
Views
1K
Erotic Stories
Threatlevelmidnight
T
T
Taylor’s Butt, In the Library, With a Dildo
Replies
1
Views
1K
Erotic Stories
Threatlevelmidnight
T
2137
*true story* i accidentaly seduced a homophobic guy
Replies
13
Views
4K
Erotic Stories
2137
2137
jamesbltn
First time with a friend |Russian Sports Camp
Replies
18
Views
4K
Erotic Stories
michaelnola
M
Top Bottom