Cock ring/balls wrung

Discussion in 'Sex With a Large Penis' started by Imported, Feb 8, 2004.

  1. Imported

    Gold Member

    Joined:
    Jan 1, 2000
    Messages:
    56,713
    Likes Received:
    55
    headbang8: OK, guys.  Embarassing question coming up.

    My dick isn't the problem.  While generously-sized, it rarely gives me (or anyone else) cause for concern.  But my scrotum is visible from outer space.

    So how does a guy with XXL balls get into a cock-ring?

    I bought the biggest metal ring that a very large, reputable sex shop had in stock.  (Forgive me if I didn't ask the guy behind the counter for instructions)

    You start with your balls first, right?

    I find that once I pull the first testicle through the ring, there's not enough room to get my fingers through to pull the second into place.  

    That means I need to push the other testicle through from the side closest to the body--I don't need to tell you how painful that can be.  AS well as taking ten or fifteen minutes to fiddle around until I sink the putt.

    Once the balls are in place, slipping the dick through is comparatively easy.  

    I've tried those adjustable snap-on types, but they never seem to work.  The snaps always snag the pubes--ouch.

    And I'm a bit squeamish about those rubber rings.  When I worked on a farm in Australia, that's how we would crotch sheep!

    Not sure a bigger ring (if I could find one) would help.  The couple of times I've managed to get into it, the size feels about right--it's pretty tight, but then, it's supposed to be, isn't it?

    Any dextrous LPSGers have a tip on technique?  It'd be greatly appreciated.

    Damn those balls!  Sometimes, I feel like whipping them off and replacing them with sugared almonds.

    hb8
     
  2. ericbear

    Gold Member

    Joined:
    Oct 14, 2002
    Messages:
    1,117
    Albums:
    1
    Likes Received:
    238
    Gender:
    Male
    Location:
    Santa Ana (CA, US)
    If you have very big balls, you will not be able to get into a standard solid metal cock ring. There are certain metal rings that are split into two halves, and which are fastened together with screws after they are put on. However, these tend to be of very heavy construction, because they are really meant for weighting down the scrotum, not as cock rings.

    I suggest you try one of the neoprene rubber rings. These are different from the thin rubber rings. They are made of soft, stretchy neoprene, and are quite wide, so that they don't cut into you (as do the rings used on sheep!). The downside is that they are fairly costly, and I tend to stretch them out of shape after a while. To see the sort I am talking about, follow this link: http://www.665leather.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=100&Product_Code=240137
     
  3. Imported

    Gold Member

    Joined:
    Jan 1, 2000
    Messages:
    56,713
    Likes Received:
    55
    tomarctus: I use leather cock rings that snap or have velcro. As much as I like the look of a steel ring I prefer being able to take mine off easily if I feel any discomfort. I can attach them even with a full hard-on. It takes some trial and error to find a strap that doesn't pinch like you describe. I've tossed out plenty.
    I like the rubber rings, too. Since they stretch they are easier to get on and off. I pull my soft cock through first, then push the ballls through one at a time. When I get hard everything stays in place. To remove the rubber ring when hard I push each ball through first then roll the ring off my cock.
    I will gladly trade my kumquat sized balls for your XXL pair. ;D
     
  4. Imported

    Gold Member

    Joined:
    Jan 1, 2000
    Messages:
    56,713
    Likes Received:
    55
    norseman: Long live VELCRO

    I use a simple velcro strap (scratchy side out) for the "up all night" experience. Its the ultimate in ease and adjustability. Sometimes I just bind up the balls for a different pounding sensation, sometimes the big guy and the two boys end up being tied up for a Viagra-less experience. Any store that sells sewing stuff is likely to sell a pre-packaged hook and loop kit. The softer fuzzy strip goes around the equipment fuzzy side out, the scratchy hook strip can be cut to a smaller patch to bind it all together, tight as you like.

    Play carefully out there...

    Norse
     
  5. Imported

    Gold Member

    Joined:
    Jan 1, 2000
    Messages:
    56,713
    Likes Received:
    55
    NorwaySchlong: Hi,

    Why have the ring below the balls?

    I pull the ring to the base of the cock. Much better than having the balls into it!

    And: Check out your curtain shop, LOTS of rings in all sizez, metal, wood, plastic, in all sizez, almost for free!

    And buy 5 and put them all on!

    regards,

    NSchlong
     
  6. Imported

    Gold Member

    Joined:
    Jan 1, 2000
    Messages:
    56,713
    Likes Received:
    55
    grantstephens: I use standard silicone ball and cock rings. Super stretchy and nice and tight when I'm hard. Wrap one around the whole package and then one around the shaft. Feels quite good, and of course the head of my cock blows up and gets very big - my asain wife flips out when I do this......
     
Draft saved Draft deleted