Cock ring recommendations

[Ne0n_Tiger]

can you guys recommend a cock ring for a guy who does not have low hanging balls. i've tried the steel rings and silicon rings, but they don't seem to stay in place.

 

[RowanB]

Size or hang of your balls won't really make a difference. You just need to find something that is the right size to fit well around the base. Maybe try the adjustable ones, like the leather snap rings so you can make it as tight/loose as you need.

I most often wear a metal one which fits nicely and doesn't shift. You'll need to be careful to get the right size ofcourse (there are loads of websites that tell you how to measure).

Sometimes (like last night) have issues with the metal ones, but it's only right after I shave everything downstairs. The metal really grabs and pulls at the skin, so you'll need to lube it up a little to keep it for getting annoying.

Have attached pics of my leather and metal ones mentioned above
View media item 1285397View media item 1094397

 

[mac_46_46]

Not a masturbation story, but a kind of embarrassing cock sucking stories. I once sucked a guy at an ABS and went to McDonalds right afterward. After waiting in line, getting and eating my food, I then went into the men's room. i looked in the mirror and discovered I had a nice glob of cum stuck in my beard. At first I was likm "Aw, shit!", but now I kind of get a little chuckle about it. As for anyone that did notice it, there was absolutely no doubt that it was anything but cum in my beard.

 

[Larrylibido]

can you guys recommend a cock ring for a guy who does not have low hanging balls. i've tried the steel rings and silicon rings, but they don't seem to stay in place.

Take a look at Armour Up. They have some cool pieces. I bought the original and found that it didn’t fit as well as I thought it should. I purchased the “sport” version which is a little more flexible with a smaller opening. I first thought the opening may be too tight and cut off circulation to my stuff. Quite the contrary. No issues at all. I love it. In fact, I have it on right now. I’m wearing it at work, 10 hours with it on. And I never slip out of this one!

 

[deleted1230731]

you can get a type that has two parts. One part goes around the base of your cock and one part is specifically made to pull your balls through.

 

[wilsonthevolleyball]

I've used the silicone type. Sometimes it is hard to get your balls through it if they are pulled up tight. When my balls are hanging I sometimes just put them in it and jackoff. It sometimes makes for a better O.

 

[Larrylibido]

I've used the silicone type. Sometimes it is hard to get your balls through it if they are pulled up tight. When my balls are hanging I sometimes just put them in it and jackoff. It sometimes makes for a better O.
View attachment 1151696 View attachment 1151700 View attachment 1151707 View attachment 1151711 View attachment 1151713 View attachment 1151714

Those are some hot pics. Dang.

 

[pachuco2]

I know you stated you try metal,...but this works for me

 

[Larrylibido]

This is my favorite. Of course I’m not hard in it but I can wear this thing all day.

 

[Krusader]

Check out my gallery i got a ton of them

 

[Ne0n_Tiger]

Take a look at Armour Up. They have some cool pieces. I bought the original and found that it didn’t fit as well as I thought it should. I purchased the “sport” version which is a little more flexible with a smaller opening. I first thought the opening may be too tight and cut off circulation to my stuff. Quite the contrary. No issues at all. I love it. In fact, I have it on right now. I’m wearing it at work, 10 hours with it on. And I never slip out of this one!

can i see what it looks like with it on?

 

[Larrylibido]

can i see what it looks like with it on?

can i see what it looks like with it on?

here it is. Limp in this photo but shows what it looks like

 

[henry777]

Try this adjustable one. $5 on Pinkcherry.

My gay blog: http://mendujour.tumblr.com

 

[rbi99]

I tried going with a stainless steel ring, but I had a ton of trouble getting it on. Ended up purchasing a 1/2" wide, adjustable leather cock ring. I have since had several costume made for myself by having the width changed and the location of the snaps moved. Even my 2" wide ring cost me less then $10. I wear the 1/2" one 24/7, and occasionally put the 2" one on over it for effect. Leather doesn't have the weight of steel of course, but the ease putting it on, adjusting it and removing it far outweigh the negatives in my opinion. My erections and orgasms are mind blowing, and there are other advantages for me that make these one of the best things I have ever done for myself.

 

[RowanB]

I tried going with a stainless steel ring, but I had a ton of trouble getting it on. Ended up purchasing a 1/2" wide, adjustable leather cock ring. I have since had several costume made for myself by having the width changed and the location of the snaps moved. Even my 2" wide ring cost me less then $10. I wear the 1/2" one 24/7, and occasionally put the 2" one on over it for effect. Leather doesn't have the weight of steel of course, but the ease putting it on, adjusting it and removing it far outweigh the negatives in my opinion. My erections and orgasms are mind blowing, and there are other advantages for me that make these one of the best things I have ever done for myself.View attachment 1167077

As hot as these look on a guy, I actually find them incredibly uncomfortable myself. The top buttons that aren't clipped in really dig into skin and can become quite irritating & rather painful.

 

[rbi99]

As hot as these look on a guy, I actually find them incredibly uncomfortable myself. The top buttons that aren't clipped in really dig into skin and can become quite irritating & rather painful.

I had the same issues. I ended up going with garment leather which is softer and causes me far less irritation. I also apply skin lotion frequently. One of the things I had customized was shortening the length of the leather so that I didn't have much extra left after snapping it up.

 

[rbi99]

I also went with two snaps rather then three or four. Looking at your pics though it appears you have no problem getting your steel rings on!!!

 

[RowanB]

I also went with two snaps rather then three or four. Looking at your pics though it appears you have no problem getting your steel rings on!!!

LOVE my steel rings. Very comfortable for all day wear and never had any issues. Especially like the thick, heavy one.

 

[185248]

Is there really a Lord Of The Rings?

 

[rbi99]

LOVE my steel rings. Very comfortable for all day wear and never had any issues. Especially like the thick, heavy one.

I never wear underwear because I love the feel of my stuff flopping around, but even the leather adjustable that weights almost nothing, inhibits movement a tiny bit. Does a heavy stainless ring inhibit your junk from flopping around? It just seems that the weight would reduce how much freedom your shit has to "move about the cabin". Another factor would be the width of the ring. I know my 2" wide leather certainly affects it for obvious reasons.