Help, looking for cock ring. Frustrating due to 6.5 grith

popup_al

Cherished Member
Joined
Mar 29, 2021
Posts
54
Media
0
Likes
425
Points
63
Location
Allentown (Pennsylvania, United States)
Sexuality
90% Straight, 10% Gay
Too tired to work it out... so what does that come to in diameter? Go a good hardware store and find the area for "fencing" - they'll have a lot of closure hardware there and look for your diameter in a metal ring and try it (not at the store.) The rings will prolly be either steel or brass. Once you find the right size, get another, then another, etc. Then try neoprene rings online. You'll figure it out.
 

Wooly Mammoth

Legendary Member
Verified
Gold
Cammer
Joined
Oct 19, 2005
Posts
278
Media
49
Likes
1,969
Points
598
Location
Portland (Oregon, United States)
Verification
View
Sexuality
80% Gay, 20% Straight
Gender
Male
I have similar girth. I like metal cock rings: the 2.125" diameter is one that I can use any time, since it's fairly easy to remove.

Occasionally, I live dangerously and use 2" but I sometimes regret the struggle taking them off.

Metal rings can be dangerous. I have met men who say they had to get them removed at the emergency room.

I think the best one to start with is a leather cock ring with lots of snaps. You can try many different sizes and they are always easy to take off.
 

Wild_Bill_Big_Cock

Superior Member
Verified
Gold
Joined
Mar 17, 2019
Posts
667
Media
86
Likes
5,238
Points
388
Location
Adelaide (South Australia, Australia)
Verification
View
Sexuality
100% Straight, 0% Gay
Gender
Male
I bought the largest metal ring that they sold in my local sex shop. It was marked XXXXL and 55mm internal diameter. After a short time wearing it, it becomes painfully uncomfortable and difficult to remove. To me, that means it is too small for me.

Instead of the rings sold as cock rings, I use a woman's bangle bracelet I bought at the five and dime. It looks good and is 65mm internal diameter.

Have you measured yourself around your flaccid cock and balls with a tailor's tape pulled taut not tight? If so, what is your measurement?
 

Wild_Bill_Big_Cock

Superior Member
Verified
Gold
Joined
Mar 17, 2019
Posts
667
Media
86
Likes
5,238
Points
388
Location
Adelaide (South Australia, Australia)
Verification
View
Sexuality
100% Straight, 0% Gay
Gender
Male
Go to a knowledgable sex shop and get fitted
Get fitted? Like, whip your cock out and start trying rings on as you would shoes in a shoes store?
 
D

deleted5700751

Guest
i run a soft clear jelly silicone one. it's soft enough that you can easily squish it with your finger, so it doesnt make my cock sore after using it or inhibit the path my cum like an oring does.
 

thongboy

Superior Member
Joined
Apr 6, 2014
Posts
1,375
Media
0
Likes
3,136
Points
183
Location
Canada
Sexuality
50% Straight, 50% Gay
Gender
Male
Get fitted? Like, whip your cock out and start trying rings on as you would shoes in a shoes store?
something like that — if you want metal. Rings that have some flexibility — stretch, velcro, leather with adjustable snaps — are easier if you're a beginner. But a lot of us want metal, especially if it involves more than one ring, and knowledgable assistance can be a real help. There are three useful measurements that should be taken. Around the base of the cock itself, around both the cock and balls together and if you want a triple package, around the ball sac.
 

Wild_Bill_Big_Cock

Superior Member
Verified
Gold
Joined
Mar 17, 2019
Posts
667
Media
86
Likes
5,238
Points
388
Location
Adelaide (South Australia, Australia)
Verification
View
Sexuality
100% Straight, 0% Gay
Gender
Male
something like that — if you want metal. Rings that have some flexibility — stretch, velcro, leather with adjustable snaps — are easier if you're a beginner. But a lot of us want metal, especially if it involves more than one ring, and knowledgable assistance can be a real help. There are three useful measurements that should be taken. Around the base of the cock itself, around both the cock and balls together and if you want a triple package, around the ball sac.
Have you measured yourself around your cock and balls?
 

Wild_Bill_Big_Cock

Superior Member
Verified
Gold
Joined
Mar 17, 2019
Posts
667
Media
86
Likes
5,238
Points
388
Location
Adelaide (South Australia, Australia)
Verification
View
Sexuality
100% Straight, 0% Gay
Gender
Male
something like that — if you want metal. Rings that have some flexibility — stretch, velcro, leather with adjustable snaps — are easier if you're a beginner. But a lot of us want metal, especially if it involves more than one ring, and knowledgable assistance can be a real help. There are three useful measurements that should be taken. Around the base of the cock itself, around both the cock and balls together and if you want a triple package, around the ball sac.
If I whipped my cock out, I'd be asked to leave immediately, or arrested. Which shop have you had that kind of service?
 
D

deleted4500261

Guest
I looked at your photo and video. Your hands must be the size of a toaster if you’re 6.5” girth. That is thick!
 

Hungmcc

Worshipped Member
Verified
Gold
Joined
Dec 23, 2017
Posts
267
Media
125
Likes
13,613
Points
413
Verification
View
Sexuality
69% Gay, 31% Straight
Gender
Male
This might sound crazy but of every ring I’ve tried, the most comfortable with the best results is just a simple silicone bracelet(over the balls too obviously, and most stores have the same standard size). Won’t work for everyone of course, but I’ve always struggled to find something that felt as good because of my girth being similar to yours. Happy hunting.
 

Mushrhoom

Expert Member
Joined
May 29, 2011
Posts
270
Media
7
Likes
242
Points
188
Location
Laos
Sexuality
60% Gay, 40% Straight
Gender
Male
If you're 6.5" girth, a simple 50 mm O-ring would be a perfect fit. I'm 6.25" at the base, and it's just marginally tight enough on me when I'm super hard.
 
  • Like
Reactions: Zyz

Wild_Bill_Big_Cock

Superior Member
Verified
Gold
Joined
Mar 17, 2019
Posts
667
Media
86
Likes
5,238
Points
388
Location
Adelaide (South Australia, Australia)
Verification
View
Sexuality
100% Straight, 0% Gay
Gender
Male
If you're 6.5" girth, a simple 50 mm O-ring would be a perfect fit. I'm 6.25" at the base, and it's just marginally tight enough on me when I'm super hard.
Are you talking about a rubber ring around your shaft? What about a metal ring around your cock and balls?