How do I get an even pump?

[Mildythick]

Hi everyone, new to lpsg and kinda new to pumping. Everytime I pump it’s uneven. Some parts of my cock are more pumped than others. The base never can get as thick as the rest of the shaft. Just wondering if there was a way to make sure my pump is even. Thanks for any help.

 

[cockydude2018]

Always keep the vacuum lower than what you think it should be. Pump it up to plump it up. Then put your fattened cock in faded jeans or commando in gray sweats. In other words, go light on the pump, and pump to impress

 

[Lakeshore]

When I began pumping, I learned to pump with a very low vacuum. If I pumped with too much vacuum, I had uneven areas on my shaft and grossly enlarged foreskin. A little goes a long way during your early days of pumping. Btw, I gained 1 1/2" in length over 2 years by using a pump and jelqing. I used a tube that was only 1/4" wider than my dick to encourage lengthening. It was worth the effort.

 

[Mildythick]

When I began pumping, I learned to pump with a very low vacuum. If I pumped with too much vacuum, I had uneven areas on my shaft and grossly enlarged foreskin. A little goes a long way during your early days of pumping. Btw, I gained 1 1/2" in length over 2 years by using a pump and jelqing. I used a tube that was only 1/4" wider than my dick to encourage lengthening. It was worth the effort.

I probably need to get a narrower pump. And my ball’s always end up in the pump wether I want them in or not.

 

[8inchy]

Mildlythick.
You are on the right path. Besides the great low pressure pumping advice from Lakeshore and cockydude2018 you need to have a variety of devices. Either different sized pumps that you use in stages or donuts that restrict the balls from creeping in.
Here is an example of when I went too hard and got distortion. Also a slow mo slam for fun.

 

[8inchy]

I probably need to get a narrower pump. And my ball’s always end up in the pump wether I want them in or notIt

sounds like you've figured it out. Get a silicone donut to make sure the balls dont go in

 

[Lord_of_Goon]

Hi everyone, new to lpsg and kinda new to pumping. Everytime I pump it’s uneven. Some parts of my cock are more pumped than others. The base never can get as thick as the rest of the shaft. Just wondering if there was a way to make sure my pump is even. Thanks for any help.

Take your time. Do it in stages. And I tell everyone to use hot towel wraps for warm up and in between pump intervals.

 

[Horsegirth]

I pump three times a day and masterbate heaps. A warm cylinder and lower pressure pump. I want to pumped in bondage till massive and can't hide in my pants.