Length Pumping, Packing, and Blisters...

[skyfalcon888]

Hi all,

Decently experience pumper here...

For reference, I'm about 6.2" girth, unpumped. I currently use a 2.2" tube, and I am able to pack it from base to the glans. I have also been getting blisters fairly easily, so my theory is that because I pack it in about 10 minutes....It's causing blisters on the head, where I get them frequently.

I usually do 7-10 minute sets with a minute without pressure. I've been using a heating pad, and I have been trying to aim for a total of 1 hour @ 8-10inHg (sometimes I spike a hair to just help pull, then release pressure).

All that background aside:

People say for length gains, they suggest a tube diameter close to their girth, however, for me, I can pack my tube, and I keep getting blisters.

Does it make sense to size up? Go to a 2.5" diameter?

 

[030699]

I mean, an hour seems like a lot to me as a fellow pumper, but then you are getting the blisters within 10 minutes - you mention packing it out - are you entirely filling the full length of the tube, from width to length as well?

I wonder if what might be happening is there is so little air to cause a vacuum (because your penis is packing out the cylinder) that its experiencing a higher pressure than the quoted relevant measured pressure because of that lack of buffer air, if that makes sense? Are you using a 9" length cylinder? Could you go up to a 12?"

 

[skyfalcon888]

I mean, an hour seems like a lot to me as a fellow pumper, but then you are getting the blisters within 10 minutes - you mention packing it out - are you entirely filling the full length of the tube, from width to length as well?

I wonder if what might be happening is there is so little air to cause a vacuum (because your penis is packing out the cylinder) that its experiencing a higher pressure than the quoted relevant measured pressure because of that lack of buffer air, if that makes sense? Are you using a 9" length cylinder? Could you go up to a 12?"

Thanks for the reply.

Sorry I pack it in about 10-15 minutes.

I get blisters at the longer end of the spectrum.

Maybe I need a wider tube, because I can't really get longer without adding time/pressure?

 

[030699]

I think its worth a shot, what length is the cylinder? can you get longer?

 

[skyfalcon888]

I think its worth a shot, what length is the cylinder? can you get longer?

Sorry, it's 9"x2.2"

 

[030699]

yeah maybe go for a 12" that is also a bit wider

 

[mushroomcap]

I think you need a wider tube. You’re packing it rather quickly which concentrates all the vacuum on the head of your cock. This is probably why you’re getting blisters at a relatively low level of vacuum.

 

[skyfalcon888]

I think you need a wider tube. You’re packing it rather quickly which concentrates all the vacuum on the head of your cock. This is probably why you’re getting blisters at a relatively low level of vacuum.

Thanks for the advice! I'm worried a 2.5 is too big? I guess start in the 2.25, then move up? I really hope to just keep getting length...I guess with more room, I can keep getting longer, right? Not have it all on the head?

 

[tripod]

It’s neither the tube nor the time… it’s the pressure. 8-10inHg is very high pressure. Forget about the bullshit you read on the internet… 8-10inHg is too fucking high. Length pumping is largely a myth. Pumping can get a little length gains but mostly it’s for girth. I’ve been pumping for 24 years… trust me.

 

[skyfalcon888]

It’s neither the tube nor the time… it’s the pressure. 8-10inHg is very high pressure. Forget about the bullshit you read on the internet… 8-10inHg is too fucking high. Length pumping is largely a myth. Pumping can get a little length gains but mostly it’s for girth. I’ve been pumping for 24 years… trust me.

I definitely see/hear a number of things.

I see you're fairly large....have you had any permanent gains? I see you use a fairly wide tube too....I may have some questions if I may PM?

 

[baggage]

I definitely see/hear a number of things.

I see you're fairly large....have you had any permanent gains? I see you use a fairly wide tube too....I may have some questions if I may PM?

What type of lubricant are you using,need to keep it moist.

 

[skyfalcon888]

What type of lubricant are you using,need to keep it moist.

Lotion/Baby oil/Another lubricant....I use some...but clearly need to give it more thought.

 

[030699]

I think you need a wider tube. You’re packing it rather quickly which concentrates all the vacuum on the head of your cock. This is probably why you’re getting blisters at a relatively low level of vacuum.

Thank you for saying it clearly when I couldn't find the words