Penis Moulding - Tonights the night ..

Discussion in 'Sex With a Large Penis' started by lerotic, Jan 8, 2012.

  1. lerotic

    Verified Gold Member

    Joined:
    Jul 21, 2008
    Messages:
    776
    Likes Received:
    16
    Gender:
    Male
    Verified:
    Photo
    Last year we talked about penis moulding for a chocolate mould. We tried the "Clone a willy" kits and it was disastrous..

    After some research we found a UK company called BodyCast who do a "Lunchbox" kit with a good amount of resign etc etc and we've done all the prep, read up on the "plunge method" and we're about to start :)

    Should be good fun and using an old 2 litre coke bottle as the receptacle we're going for the old cock and balls moulding.. All going well this should be one hell of a chocolate bar for our friend (that's another story)..

    Hopefully pictures as this progresses ..

    The Lunch Box - Intimate Casting Kit for Him penis cast[willy moulds]vagina plaster moulds/3d penis moulds/pecker casting kit [BCS0017] - £34.99 : Body Cast Studio, Exclusive to us, Unique to you
     
  2. ItalianT

    Verified Gold Member

    Joined:
    Aug 1, 2010
    Messages:
    169
    Albums:
    10
    Likes Received:
    766
    Gender:
    Male
    Location:
    Philadelphia/Bethlehem PA
    Verified:
    Photo
    That's awesome! Hahaha
     
  3. lerotic

    Verified Gold Member

    Joined:
    Jul 21, 2008
    Messages:
    776
    Likes Received:
    16
    Gender:
    Male
    Verified:
    Photo
    Step 1
    Get vessel and mix ready

    Step 2
    Get chairs ready for the "plunge" method
     

    Attached Files:

  4. luvnlg

    Gold Member

    Joined:
    Jul 20, 2004
    Messages:
    660
    Albums:
    4
    Likes Received:
    221
    Gender:
    Male
    Location:
    upstate.NY
    On pins and needles to see the results, oh, and I like choclate too. ;-)
     
  5. ignatius4446z

    ignatius4446z Active Member

    Joined:
    Apr 17, 2010
    Messages:
    415
    Albums:
    1
    Likes Received:
    123
    Gender:
    Male
    Location:
    In the dreams of a mischievous demon
    My gf and I were going to do this with a different kit, but

    1. The mould was too small (only 7" IIRC).

    2. We decided the £40 could be better spent on other stuff.
     
  6. lerotic

    Verified Gold Member

    Joined:
    Jul 21, 2008
    Messages:
    776
    Likes Received:
    16
    Gender:
    Male
    Verified:
    Photo
    Yeah the mould was just awful, the £40 for these is more to do with we wanted a good mould made as there is going to be a website to sell them.. We threw up a test joke site a while back and it got loads of hits and enquires ..
     
  7. novice_btm

    Staff Member Moderator Gold Member

    Joined:
    Feb 25, 2006
    Messages:
    18,200
    Albums:
    4
    Likes Received:
    861
    Gender:
    Male
    Location:
    Los Angeles (CA, US)
    Definitely interested in hearing about the process and results!
     
  8. Rikter8

    Gold Member

    Joined:
    Jun 30, 2005
    Messages:
    4,488
    Albums:
    3
    Likes Received:
    51
    Gender:
    Male
    Location:
    MI
    I love your kitchen.
     
  9. lerotic

    Verified Gold Member

    Joined:
    Jul 21, 2008
    Messages:
    776
    Likes Received:
    16
    Gender:
    Male
    Verified:
    Photo
    OK so that was interesting..

    Lots learned and lots of information to share.. I'll do it with posts and pictures , all in separate posts so it makes sense.

    The first mistake :

    As a receptial i used a 2litre cock bottle with the end cut off. The main reason is i needed something that held 1900ml of fluid. The bottle itself held that amount but in tests with erection i could put my cock and balls in it no problem.

    With thickening liquid it's a different matter.

    My cock was pushed to one side of the bottle and my balls didn't quite fit. So i didn't manage to get my whole length inside.

    I originally looked for a 3litre bottle those jumbo types but we don't see to have them in the UK any more.

    So an off centre entry made my cock hit the side of the bottle as you can see. My thumb marks the depth on this bottle. The fact that you had to plunge into cold water does help either. Warm or tepid water makes the resin set far too quick.
     

    Attached Files:

  10. Phil Ayesho

    Gold Member

    Joined:
    Feb 26, 2008
    Messages:
    5,595
    Likes Received:
    884
    Gender:
    Male
    Location:
    San Diego
    If this is an alginate mold, you should not try to pour chocolate into it.
    Alginate molds are very short lived... the water used to make them starts to evaporate the minute they are set and they will shrink and distort overnight.

    If using alginate, the proper technique is to immediately use the mold to cast a Plaster master.

    Once you have a durable plaster master... you can make a mold that is better suited to production of chocolate.
    Your final mold can be either gelatin, or in silicone...

    but be aware that silicones are not ALL food safe...
    You need to make sure you are using a platinum cured silicone that is rated Food Grade.

    If this rig is using a silicone for the initial mold... then you need to verify that this silicone is food safe.

    Non-food grade silicones can leach pigments and soaps of tin or platinum... and metal exposure is cumulative... so you do not want to ingest them, nor do you want them in contact with your skin.
     
  11. ignatius4446z

    ignatius4446z Active Member

    Joined:
    Apr 17, 2010
    Messages:
    415
    Albums:
    1
    Likes Received:
    123
    Gender:
    Male
    Location:
    In the dreams of a mischievous demon
    How long does the mixture take to set?

    Is it cold?

    Did you have any trouble keeping wood?
     
  12. lerotic

    Verified Gold Member

    Joined:
    Jul 21, 2008
    Messages:
    776
    Likes Received:
    16
    Gender:
    Male
    Verified:
    Photo
    That's fantastic info about the moulding process. The problem with this is i have no idea how to find a chocolateer that'll help me here.

    The mould i used was dental grade silicon and i was assured it was food safe. The pack came with plater as it should have been cast in this.

    This is prototype v1.0 :)
     
  13. lerotic

    Verified Gold Member

    Joined:
    Jul 21, 2008
    Messages:
    776
    Likes Received:
    16
    Gender:
    Male
    Verified:
    Photo
    About 2 minutes
    Yes
    Yes... Mind was on the mould and not keeping wood. Should have used a cock ring.
     
  14. boxerboy

    Verified Gold Member

    Joined:
    Jul 31, 2006
    Messages:
    516
    Albums:
    2
    Likes Received:
    81
    Gender:
    Male
    Location:
    Manchester
    Verified:
    Photo
    Can't wait to see the results :)
     
  15. lerotic

    Verified Gold Member

    Joined:
    Jul 21, 2008
    Messages:
    776
    Likes Received:
    16
    Gender:
    Male
    Verified:
    Photo
    So with the mould created it was time to pour the chocolate.

    The mould required about 300ml to fill ( this was measure by pouring water in and then out to a measuring jug)..

    For reference the chocolate i used means if you ate this solid cock you're looking at around 2100 calories! This means there is a whole new set of cheesy chat up lines about calories and being hungry coming !

    I used proper cooking chocolate so it melted at a low heat and poured it in, gave it a good poke and shake to get any air out and now it's in the fridge setting.

    I'm guessing I'm going to have to cut the mould apart to get it out but this should be interesting. I should leave it till the morning but lets see if i can wait that long or curiosity does kill this cat :)
     

    Attached Files:

  16. Phil Ayesho

    Gold Member

    Joined:
    Feb 26, 2008
    Messages:
    5,595
    Likes Received:
    884
    Gender:
    Male
    Location:
    San Diego
    For a better result, cast a plaster master... then use the same silicone material, only butter it over the plaster in a skin no more than 1/4 inch thick.
    Over that, Make a two part plaster Jacket.... one half at a time... where each half is registered to the other with a few "keys"--- essentially male-female dimples along the separation line between the plaster halves.


    With a thin skinned silicone mold, you should be able to Demold the master and chocolate casting by de-gloving... essentially grabbing the base of the mold and pulling it off like a sock, inside out.
    This way you can cast chocolate cocks without cutting the mold and getting a seam line.

    To get a longer lasting erection, try doing this with a piss hard on... or taking a viagra before casting...
     
  17. Phil Ayesho

    Gold Member

    Joined:
    Feb 26, 2008
    Messages:
    5,595
    Likes Received:
    884
    Gender:
    Male
    Location:
    San Diego
    You don't need a chocolatier... you need to find sources in the movie prop and special effects makeup business.

    The kind of folks who take body molds for a living.
     
  18. lerotic

    Verified Gold Member

    Joined:
    Jul 21, 2008
    Messages:
    776
    Likes Received:
    16
    Gender:
    Male
    Verified:
    Photo
    How much fantastic information do you have on this ?

    I need to try and find someone to help out with this, not sure i can just call up a movie prop company and ask for help moulding a cock.
     
  19. Phil Ayesho

    Gold Member

    Joined:
    Feb 26, 2008
    Messages:
    5,595
    Likes Received:
    884
    Gender:
    Male
    Location:
    San Diego
    You want the guy who works making the molds...
    They are often between films and need the cash...

    Go online and look up "Creature Effects, physical"...

    Tho- from what you tell, you already have a good fast cure platinum silicone... you just need someone practiced to do the actual work while you keep your mind on more... stimulating... thoughts.

    Another good trick is to use a large TAPERED wax paper cup- the kind you get huge cokes in at the fast food joint ( rather than your two liter bottle. )

    Cut the bottom out and place it big end down over your cock to pour...
    You have to tear off the cup to get the rubber loose.... however, ANY OTHER paper cup of the same make will act like a Jacket to hold the mold straight--- and because of the taper, the mold will slide in and out of the cup easily if you put a little baby powder on the outside of the mold.

    IF you are careful to use an oversize cup, and you do NOT fill the rubber all the way to the hole on the bottom ( now on top) then when you have to cut the mold up one side for demolding... the tapered cup will allow the mold to settle down tighter into the cup- pressing the cut edges together tightly and accurately and you will find it very hard to even see the seam on the resulting casting.
     
  20. Amplexus

    Amplexus Member

    Joined:
    Aug 5, 2006
    Messages:
    64
    Likes Received:
    18
    Gender:
    Male
    Location:
    USA
    Here is the result of cloning my bone in plastic. I even bedecked it with a favorite cock ring...:wink: Made it as a Valentine gift...LOL.
     

    Attached Files:

Draft saved Draft deleted