Pulse pumping

[Timmy 69]

Does Pulse Pumping target Girth or Length ?

 

[vnmous]

Pumping usually targets girth

 

[huguest]

What do you mean by "pulse" pumping?

 

[vnmous]

I wondered about that too

 

[Timmy 69]

Pulse Pumping is a technique based on changing the levels of pressure applied within one session. If you change the pressure when pumping your penis, it causes penile tissues to dilate better and accumulate more blood. This technique is considered as very effective and is highly competitive.

Eg, Pump to 10”Hg and immediately start the clock. At 20 seconds drop pressure to 3”Hg; at 30 Seconds quickly pump up to 10”Hg; at 50 seconds drop pressure down to 3”Hg. Continue with this pulse rhythm for 5-10 minutes; 20 seconds high vac, 10 seconds low vac.

- pulse pump 10 -20 reps, where one rep is 20 sec at 10”Hg then 10 sec at 3”Hg
- 2 reps = 1 minute

 

[BaddJack]

as a highly competitive pumper, I venture to -20"Hg, and on occasion -25"Hg, I totally agree that this method works - just need to be extra careful regarding blistering

 

[Timmy 69]

as a highly competitive pumper, I venture to -20"Hg, and on occasion -25"Hg, I totally agree that this method works - just need to be extra careful regarding blistering

What is your routine if you don't mind me asking ?

 

[BaddJack]

I no longer go with any special routine, I simply pump it up gradually, release the vacuum and redo as many times as it takes to start stuffing the tube, once I fully stuff to about the 6.0 inch mark in my 12.0x2.25 tube I pump to -20"Hg and hold it for 20 seconds depending on how it feels, release and do over as many times as want to, being watchful of blistering, I also wear a glans cap to minimize blisters - https://data.lpsg.com/photos/m/277/277007-1406858723-e0d67e805f3db36f693135d7834ed416.jpg

 

[Timmy 69]

I no longer go with any special routine, I simply pump it up gradually, release the vacuum and redo as many times as it takes to start stuffing the tube, once I fully stuff to about the 6.0 inch mark in my 12.0x2.25 tube I pump to -20"Hg and hold it for 20 seconds depending on how it feels, release and do over as many times as want to, being watchful of blistering, I also wear a glans cap to minimize blisters - https://data.lpsg.com/photos/m/277/277007-1406858723-e0d67e805f3db36f693135d7834ed416.jpg

O.k. thanks for that .

 

[BBB2.5]

I no longer go with any special routine, I simply pump it up gradually, release the vacuum and redo as many times as it takes to start stuffing the tube, once I fully stuff to about the 6.0 inch mark in my 12.0x2.25 tube I pump to -20"Hg and hold it for 20 seconds depending on how it feels, release and do over as many times as want to, being watchful of blistering, I also wear a glans cap to minimize blisters - https://data.lpsg.com/photos/m/277/277007-1406858723-e0d67e805f3db36f693135d7834ed416.jpg

Where did you find this glan cup ?

 

[BaddJack]

Where did you find this glan cup ?

http://www.aliexpress.com/wholesale?catId=0&initiative_id=AS_20151105195640&SearchText=glans+sleeve

 

[BBB2.5]

http://www.aliexpress.com/wholesale?catId=0&initiative_id=AS_20151105195640&SearchText=glans+sleeve

Is this the same thing ? http://www.amazon.com/Silicone-Glans-Sleeve-Penis-Extender/dp/B00M7K5N80

 

[BaddJack]

Yup
I always go for the cheapest, they last about a month with regular use, then they stretch and tear.

 

[Gofor8]

I no longer go with any special routine, I simply pump it up gradually, release the vacuum and redo as many times as it takes to start stuffing the tube, once I fully stuff to about the 6.0 inch mark in my 12.0x2.25 tube I pump to -20"Hg and hold it for 20 seconds depending on how it feels, release and do over as many times as want to, being watchful of blistering, I also wear a glans cap to minimize blisters - https://data.lpsg.com/photos/m/277/277007-1406858723-e0d67e805f3db36f693135d7834ed416.jpg

I've been using a Pulsar electric pump but it's electronically limited to 11HG but the dynamic pumping options are great what equipment are you using to hit those high levels of pressure?

 

[BaddJack]

I've been using a Pulsar electric pump but it's electronically limited to 11HG but the dynamic pumping options are great what equipment are you using to hit those high levels of pressure?

I use a cheapo pistol grip pump - brass fitted, with a gauge

this is just the style, not mine, https://data.lpsg.com/photos/m/287/287084-1414725329-e81ebf22adb481d821032bc91b89eb2f.jpg

https://data.lpsg.com/photos/l/282/282974-1411504443-10e3de6997af72b57430a729fab902ff.jpg

I also have another pump I think is called a mighty mite I picked up used, better quality

 

[Gofor8]

I use a cheapo pistol grip pump - brass fitted, with a gauge

this is just the style, not mine, https://data.lpsg.com/photos/m/287/287084-1414725329-e81ebf22adb481d821032bc91b89eb2f.jpg

https://data.lpsg.com/photos/l/282/282974-1411504443-10e3de6997af72b57430a729fab902ff.jpg

I also have another pump I think is called a mighty mite I picked up used, better quality

Awesome, I'll do some reading up on this. What are your tube measurements in the picture? The pressure your hitting is unheard of in most forums. How many minutes are holding onto + 20hg?

 

[BaddJack]

Awesome, I'll do some reading up on this. What are your tube measurements in the picture? The pressure your hitting is unheard of in most forums. How many minutes are holding onto + 20hg?

The tube is 2.25 x 9.25

I only go to -20+Hg for 10 to 20 seconds at a time, any more would cause blistering
Then I release the vacuum back to -5 and gradually work it back up
Repeating as many times as I dare