Thinking of trying a cockring...PLEASE HELP!

Discussion in 'Sex With a Large Penis' started by OmahaBeef, Apr 26, 2006.

  1. OmahaBeef

    Gold Member

    Joined:
    Mar 6, 2006
    Messages:
    1,037
    Likes Received:
    2
    Gender:
    Male
    Folks...

    I have a tough time now and then with ED, and even with Cialis I still have trouble keeping everything full.

    Because of this, I am thinking of trying a cockring during sex. However, I am a bit confused:

    1)All I am really concerned about, is a ring to have at the base of my shaft to keep the blood in there and everything full and stiff. However, I am confused because while researching I see that the ring not only contains the shaft, but also the underside of the scrotum. Why is this? Is this necessary? Or can you find one that that is for "shaft-only"?:confused:

    2)If I just want a ring for the base of the shaft, what size would I need if my circumference is at 6" (or a wee bit above if the erection is high quality)? What I mean is...the whole circumference vs. diameter has me confused as well because I stink at math LOL. Does anyone here have the same girth as myself and if so, what size ring do you use (if you use it on your shaft only?)

    I appreciate your help! Take care!

    OmahaBeef
     
  2. Oncamale28

    Oncamale28 New Member

    Joined:
    Apr 1, 2006
    Messages:
    645
    Albums:
    3
    Likes Received:
    20
    Gender:
    Male
    Location:
    Hawaii
    I've used them both ways before and find that when you put your dick and balls through they seem to work better. I think the restriction is lower to the base of your dick that way. There are some that are expandable like velcro or have snaps, maybe try this kind first dick only and dick and balls to see what works best. You could always measure this size and then buy the fixed size based on that measurement.
     
  3. chicagosam

    Gold Member

    Joined:
    Apr 16, 2006
    Messages:
    15,029
    Likes Received:
    761
  4. chicagosam

    Gold Member

    Joined:
    Apr 16, 2006
    Messages:
    15,029
    Likes Received:
    761
    And while I'm thinking of it, check out the post by IanTheTall about being creative with alternative forms of cockrings.

    Re: Cock Ring

    Go to your local Ace Hardware and check out O-rings for plumbing. They come in all sizes. And, you can also get some great metal O-rings in the hardware department. All at a great price. What a man won't do to decorate his tool! After all, Ace is the Place!
     
  5. 8.5x6

    8.5x6 New Member

    Joined:
    Sep 23, 2005
    Messages:
    395
    Likes Received:
    0
    Gender:
    Male
    Location:
    Toronto
    Yeah, there's nothing wrong with any of that, don't worry about it, just don't keep a cock ring on for more than half an hour, the blood DOES need to circulate...
     
  6. OmahaBeef

    Gold Member

    Joined:
    Mar 6, 2006
    Messages:
    1,037
    Likes Received:
    2
    Gender:
    Male
    Thanks a TON guys! I ordered last night the "ultimate" and I will go to the hardware store here to find a metal one soon.

    I appreciate your help folks!

    OmahaBeef
     
  7. 8.5x6

    8.5x6 New Member

    Joined:
    Sep 23, 2005
    Messages:
    395
    Likes Received:
    0
    Gender:
    Male
    Location:
    Toronto
    Cool! Please be sure to come back and tell me how it went! I'm curious to see how a more "home-made" version will work out...
     
  8. OmahaBeef

    Gold Member

    Joined:
    Mar 6, 2006
    Messages:
    1,037
    Likes Received:
    2
    Gender:
    Male
    Ive also gotten a ton of help from a couple of you thru PM...thank you!

    I bought one rubber/latex beaded one that stretches a good deal for shaft-only but the quality sucks and I know it'll bust anytime soon. I only want/need one for the shaft. I also ordered the "Ultimate Cockring" from thier website, which should be here any day.

    I also got a pack of the 3 different ring sizes that are rubber. I want to note that the rubber of these particular rings are NOT stretchy and not good for a shaft-only. These things are intended for the cock-n-balls together. Now...the biggest ring was 2" diameter...which would have been WAY too small for the cock-n-balls-together approach for me, but slightly too big for a shaft-only approach. I am 6" in girth without my ED drugs. I did an experiement with the 2" ring to see what kind of shaft you would need to use the 2" as a shaft-only ring.........and you would need AT LEAST a 6.75" girth penis to use a 2" ring for shaft-only....maybe even 7" +!

    So I have determined that for now I am going to try to stick with the rubber shaft-only ring that I found, and the one I just recently ordered which should be here anytime now. I may try to see if I can find a metal shaft-only ring as well as a back-up. So far with masterbation the results are exactly what I needed. I can't wait to punish my girlfriend :)

    Thanks guys!

    OmahaBeef
     
  9. OmahaBeef

    Gold Member

    Joined:
    Mar 6, 2006
    Messages:
    1,037
    Likes Received:
    2
    Gender:
    Male
    UPDATE!!!!

    Ok I got the Ultimate Cockring in the mail a while back...

    That thing was TIIIIIIIIIIIIIIIIIGHT! After taking it off it actually left an indentation/bruise around the base of my shaft. Then after a few uses it SNAPPED when I was getting close to orgasm for no apparent reason. This thing musta been stretched to the max, which is comforting to my ego, but bad for my erection. I will say this...my girlfriend was astounded. She has a large vagina as it is and before the ring she was in a bit of pain for a while when I was only really semi-erect. When I put the ring on it was pure vaginal devastation :) (In a good way).

    They have the 30 day money-back garantee thing from thier site...supposed to be one size fits all. I am a tad over 6" in girth semi-erect (or as erect as I could get prior to a ring) and this thing couldnt possibly handle anything more than 6.25" girth...at least for use after use I am guessing. Either way...I went ahead and ordered 2 more rings because they ARE very high quality.

    Still havent went to find a metal one yet...Ill keep you all posted.

    OmahaBeef
     
  10. mr_rw

    mr_rw New Member

    Joined:
    Aug 8, 2004
    Messages:
    23
    Likes Received:
    0
    Gender:
    Male
    Location:
    San Francisco
    I know this a cock ring thread but i wanted to sugest kegels just in case you havnt heard of them. Kegels are an exercise you can do that will help strengthen your erections. Im sure you can searcg this forum or google if you need more information.

    good luck - rw
     
  11. OmahaBeef

    Gold Member

    Joined:
    Mar 6, 2006
    Messages:
    1,037
    Likes Received:
    2
    Gender:
    Male
    NEW UPDATE:

    I wrote the company and explained what happened, but made it clear they have a great ring and instead of the money-back I just wanted a replacement. Either way, I ordered 2 more. I got the mail and it it had 3 new rings in it :) Thumbs up for UC!

    OmahaBeef
     
  12. snobbes

    Gold Member

    Joined:
    Mar 9, 2005
    Messages:
    3,985
    Likes Received:
    12
    I read so many stories about guys sticking their penis into diffrent holes, gettin stuck, or putting diffrent objects onto their penis, having to go to the ER to get it off. How U guys dare to put a steel ring around the base to avoid blood circulateing? Gotta admit I tried it once... only I was so affraid not beeing able to get it off, I was not even close to having an erection. Not that I have this big urge to wear one, just wanna know, what do I have to do not to end up in the ER??
     
  13. OmahaBeef

    Gold Member

    Joined:
    Mar 6, 2006
    Messages:
    1,037
    Likes Received:
    2
    Gender:
    Male
    Well my friend, if anything goes wrong with the stretchy, silicone one I am refering to, I dont think snipping it off will be too hard...

    On the other hand, if I use a metal one...I better learn to have surgical precision with bolt-cutters LOL :)

    OmahaBeef
     
  14. ChuckRich

    ChuckRich New Member

    Joined:
    Feb 21, 2006
    Messages:
    330
    Likes Received:
    0
    Gender:
    Male
    Location:
    SC, USA
    I think the same as you snobbes. That's why I haven't and don't think I ever will try a metal one. I'd only use a stretchy silicone or rubber ring or a leather strap with a snap or buckle. Anything that I know I can get off easily even while hard if I had to. The metal ones scare me.
     
  15. koloss8

    koloss8 New Member

    Joined:
    May 16, 2006
    Messages:
    2
    Likes Received:
    0
    Gender:
    Male
    The metal cockrings really need to be the correct size;
    then you wont have any need for boltcutters-
    I've used a 2.5", but 2.25" is painful when hard.
    The ace hardware variety are really similar to the shined up
    chrome rings in adult stores btw
     
  16. F_Man

    Gold Member

    Joined:
    Apr 12, 2006
    Messages:
    1,179
    Albums:
    1
    Likes Received:
    588
    Gender:
    Male
    Location:
    Helsinki (FI)
    If using a ring around both dick & balls, I recommend one that isn't too tight, that stretches (rubber), and that you don't prolong wearing it. Using the ring may help cause varicocele, ill-function of veins in the balls, and discomfort. Cheers, FM:scared2:
     
Draft saved Draft deleted