BM x30

[goks92]

Ok guys I can't seem to get this BM x30 right. I have had it for a few weeks and I am 6.25'' EL and the most I can get this too is 6.5''. I have heard its supposed to be intense pressure but it doesn't even feel like anything. When I press down on the bellows against my pubic bone water shoots out but then it just pops back up without creating any good suction. Even If I try it with just air I get barely any good results.. any tips? Thank you.

 

[Exbiker]

I think the key things are :-

• relax
• maybe two or three quick tugs on your dick before you start, but do NOT get hard
• do it SLOW
• nice warm water
• don't WORRY about seal/pressure at the start. Just get it sucking and then you can do a few more presses a bit later
• leave it on for say 10 minutes first few times, then 15, 20. No more, I don't think ...
• it's meant to be slow, incremental progress. I get no more than a few millimetres, most weeks ...

I'm pretty sure I'm on about half an inch overall, after a few months ...

:smile:

 

[Moez???]

make sure you are shaved, hair gets in the way and leaks air/water out.

 

[goks92]

Ok so it's slow incremental progress. The way people sound it is instant results for size. I was expecting immediate girth and length gains of Arleast at .5 in.

 

[sampei]

I think the key things are :-

• relax
• maybe two or three quick tugs on your dick before you start, but do NOT get hard
• do it SLOW
• nice warm water
• don't WORRY about seal/pressure at the start. Just get it sucking and then you can do a few more presses a bit later
• leave it on for say 10 minutes first few times, then 15, 20. No more, I don't think ...
• it's meant to be slow, incremental progress. I get no more than a few millimetres, most weeks ...

I'm pretty sure I'm on about half an inch overall, after a few months ...

:smile:

just a short note to say that I received today the x30 and it's far better than the standard hercules. I think I'm going to make huge progress with the x30!!

 

[naked_butler]

My advice would be if it came with spare valves change to non locking one. So much easier to use then

 

[naked_butler]

And remember it affects girth more than length

 

[hunginsouth]

Sounds like your not locking the valve if its shooting straight back, try flipping it around or as horsey said try swapping the valve

 

[goks92]

What do you mean locking the valve. I thought you lock it when filling and after you have reaches your desired size. The company had to send me a new valve as the one that came with it was faulty. They sent me a grey standard and a black one as well. The black one is a little different.

 

[naked_butler]

Horsey??

Sounds like your not locking the valve if its shooting straight back, try flipping it around or as horsey said try swapping the valve

 

[naked_butler]

I prefer black one. With the grey u supposed to push pump into body then lock... with black you just pump like normal

 

[Pretinho]

Hi goks 92. You are not the only one who has had problems with the new style
locking valve,(see my reply to "naked butler". I don't think you are doing anything wrong. The problem is the new valve is crap. I'd exchange it for the old type if I were
you.
best of luck,
Pretinho

 

[goks92]

Thanks guys for your feedback. The valve that came with it was bad and it works fine now. Also I found I can't get a good seal with the comfort pad so I use it without it. Right now I am doing 3 days on 1 off at about 12 min a session. I stretch beforehand. Any good suggestions on routines?