Monstertube in uk

[basing]

Hi all - I’m Darren from the UK.

I’ve been looking for a while to purchase a monstertube, but to be honest I am unsure whether to buy a monstertube junior or senior. As they are expensive(!) I was wondering if there is anyone here in the south of England that had either that I could visit and “try for size”.

If you can help me, I’d be really grateful.
Thanks
Darren

 

[Wellhung8x6]

Is it an enlarger?

 

[ItsAll4Kim]

Is it an enlarger?

It's a pump tube. Unique shape and is hinged to open so you never get trapped.

 

[ItsAll4Kim]

Not in UK, sorry, but have the Jr. going on ten years, and might be of some help. It's internal length is 10", opening is 3-3/4".....it's big. The larger tube is obscenely enormous.....the opening is over 4" diameter. In all this time I never packed the Jr. and my sack gets huge. See my profile for a few pics taken from start to about two hours into a session.

 

[630703]

Hi

I'm in south of England but sorry not got monster tube. I use a custom made Thickwall 3 stage which has a largish opening. Did have a 2 stage with 3 1/2" opening but had to get rid of as couldn't get out of after pumping that easy. Think this new 3 stage is about 4 or 4 1/2" opening.

 

[muscleman1965]

anyone have any pictures on the monster tubes junior and senior. Plus where can your order them. Thanks

 

[ItsAll4Kim]

anyone have any pictures on the monster tubes junior and senior. Plus where can your order them. Thanks

I have pics of me in the Jr. in my album. The current site is monster-tube.com.

 

[dingthickdong]

I stumbled across some huge plastic pasta containers in a supermarket I bought 4 because I was uncertain
of how things would work out. The openings to 2 of them was 5 inches dia and the other 2 were 7 inches dia.
I moulded the openings on one of each so as to flare the end so it would sit snug up to my pelvis,
I found that when I induced too much heat with my heat blow gun that one side of the huge tube it bulged out big so I allowed this to spread around the tube. Thus it had a swaged 5.5 inch opening and 1 inch up the tube a bowl effect chamber opening out to 7 inch dia and 4 inches along the tube. The other end that was the bottom of the tube extended another 8 inches. I heated the very end to allow the blanked end to bulge out like the flange end to create a huge bell end the same size as the 7 inch dia at the base it looked great, I drilled the end and fit a connector job done. It soon cooled and soon I had it on my cock, in a moment my balls were sucked into the huge bowl at the base, Then my cock throbbed hard and began to expand in girth and length. I was not anywhere near the bloated head end. But my cock really felt like it would explode I reduced the pressure nice, That night I kept going at it the gains I was experiencing drove me on soon my cock head reached the bloated end chamber the tingle sensation caused me to pump harder OMG in just 3 pumps the head just ballooned in to the hole chamber. I soon did the same to the other but bigger tube I finished that tube and left it to cool that night
I fell asleep with the first tube on WOW OMG I had filled the tube 13 inches long and 7 inch dia cock head
and what looked like a dog cock knot at the base. The other tube I flared and it has a same shape as this one
but much bigger Knot chamber is 10 inches dia and the bell end the same the total length though is 17 inches
No time left to try have to go to work I will soon be back to night with some lube and supplements.

 

[basing]

Not in UK, sorry, but have the Jr. going on ten years, and might be of some help. It's internal length is 10", opening is 3-3/4".....it's big. The larger tube is obscenely enormous.....the opening is over 4" diameter. In all this time I never packed the Jr. and my sack gets huge. See my profile for a few pics taken from start to about two hours into a session.

Thanks for your message. Yes it's the opening that concerns me. I don't really want all my skin around my pubic area pulled in, so was looking for a smaller opening that just allows my balls and dick in - so the junior does sound like the right choice. However I know I will want to be bigger, so I will always be wanting the bigger tube

Ok - so still searching for anyone in the United Kingdom who has a mostertube I can try for size. Thanks all