My Balls always Getting Stuck In Pump?

[Csp_18]

Hi

I bought I electronic air penis pump. But While I am pumping, I often find that I get my balls sucked in there. I have a feeling it may have something to do with the sleeves or add more lubes? How to prevent ball sack skin from getting absorbed when pumping?

 

[CatInATrenchCoat]

Make sure there is no lube on your balls, they have to be completely dry, other than that, maybe your cylinder is too big

 

[mushroomcap]

If the cylinder is on the larger side, try positioning it up against the bottom side of your penis and keep it pressed against that area firmly while you pump the air out. It may take some trial and error to get the positioning right.

Good luck!

 

[Lord_of_Goon]

Use a cock ring to keep your balls lower

 

[Csp_18]

If the cylinder is on the larger side, try positioning it up against the bottom side of your penis and keep it pressed against that area firmly while you pump the air out. It may take some trial and error to get the positioning right.

Good luck!

should I always shave the pube as well before pumping? I saw lots of people guide to do so.

 

[Csp_18]

Use a cock ring to keep your balls lower

If I wear the cock ring on the penis, the ring even will be absorbed into the pump

 

[mushroomcap]

should I always shave the pube as well before pumping? I saw lots of people guide to do so.

I can only speak from my experience with the tube I have. I trim my pubes but don’t shave and have no problems with sealing. I’ve had my balls sucked in but keeping the tube against the bottom of my dick solves that problem.

 

[Lobbyboy]

Hi

I bought I electronic air penis pump. But While I am pumping, I often find that I get my balls sucked in there. I have a feeling it may have something to do with the sleeves or add more lubes? How to prevent ball sack skin from getting absorbed when pumping?

Mine does the same

 

[Lobbyboy]

I can only speak from my experience with the tube I have. I trim my pubes but don’t shave and have no problems with sealing. I’ve had my balls sucked in but keeping the tube against the bottom of my dick solves that problem.

Good idea I’ll try that

 

[Tcruz]

Hi

I bought I electronic air penis pump. But While I am pumping, I often find that I get my balls sucked in there. I have a feeling it may have something to do with the sleeves or add more lubes? How to prevent ball sack skin from getting absorbed when pumping?

Get a sleve w a smaller hole

 

[Upik]

Hi

I bought I electronic air penis pump. But While I am pumping, I often find that I get my balls sucked in there. I have a feeling it may have something to do with the sleeves or add more lubes? How to prevent ball sack skin from getting absorbed when pumping?

I find that ball stretchers stop that happening. I also have an LA pump that doesn’t suck my balls in.

 

[goldscorpguy]

If I use my cylinder without a sleeve, I sometimes find they get sucked in.
With a sleeve, and mine is tight fitting, it never happens.

View media item 15513461

 

[coolestguy]

How big is your cylinder? Usually it's 2 inches, but try 1.75 inches. That works wonderful for me.

 

[Csp_18]

I found that if I trimmed, this problems would no that happened again. It works very well

 

[TheNewBreed]

I’m on TRT for over 6 years, and my boys definitely atrophied, and I often experience the same issue, very annoying !!
Occasionally, I will cycle Hcg, to restore size back in my balls, I don’t really get that issue while on hcg.

 

[Csp_18]

another nice try tonight