My clone a willy thread....

[molotovmuffin]

With all the clone/molding a dick threads out there, I got to thinking which LPSG member's member would I like a replica of? This is in fact a very serious problem...I mean, with so many to choose from who's would I choose?

A hard choice....but one I forced myself to make.

I managed to narrow the field down to two. Aside from having large penis's these two men also make me laugh, have great personalities, are intelligent, both maintain phenomenal bodies, take their own photos and are all around good guys. I could go on and on but I don't want to give them big heads. :wink:

So Calboner and atlecticock2 both make me drool like a fool:32: and I would beg both of you for your clones!!!

So... whose would you choose? Which current or past LPSG member would you relish a cloned phallus of? Don't just name names... I want reasoning behind your choice!


*Edit...After I finally decided on two...athleticock2 has since closed his membership:frown1:
...good thing I have contact info :wink:

 

[buddy629]

The list is very very long....and thick

 

[B_subgirrl]

RawDog's of course :biggrin1::tongue:.

And Riven's if it comes with the pretty decoration :tongue:.

 

[lorne]

Hope athleticock2 wasn't scared off by your honoured selection of him

 

[molotovmuffin]

The list is very very long....and thick

So was mine. But aside from the fact that they both have large and might I add...beautiful penises, there is more to the men. And that is why I choose them.

Hope athleticock2 wasn't scared off by your honoured selection of him

Oh...I doubt that it was me that scared him off.:wink:

 

[Hoss]

I haven't really spent a lot of time looking at the meat dept. Maybe all of them should be cloned and then I can sample them.:smile:.
















Better yet send me the originals.:lick: yum:.

 

[molotovmuffin]

I haven't really spent a lot of time looking at the meat dept. Maybe all of them should be cloned and then I can sample them.:smile:.
















Better yet send me the originals.:lick: yum:.

Don't be getting greedy there Hoss...:wink:

 

[Calboner]

I managed to narrow the field down to two. Aside from having large penis's these two men also make me laugh, have great personalities, are intelligent, both maintain phenomenal bodies, take their own photos and are all around good guys. I could go on and on but I don't want to give them big heads. :wink:

So Calboner and atlecticock2 both make me drool like a fool:32: and I would beg both of you for your clones!!!

I would be glad to oblige you if you provided the kit and if only the process weren't so difficult and chancy. I'm pretty sure that I would be unable to maintain an erection with my dick stuck in a tube of cold goo, and I've heard that the kits don't contain enough mix for large cocks anyway.

 

[ManofThunder]

I'm not sure why but this thread made me smile.

 

[TheScotsman]

I'd prefer to offer whoever would choose me the real thing, but eh...

 

[Calboner]

I'm not sure why but this thread made me smile.

Maybe because "I want your (dick) clone" is a rather ridiculous variation on "I want your baby."

 

[ManofThunder]

Maybe because "I want your (dick) clone" is a rather ridiculous variation on "I want your baby."

Haha, you may be right! :biggrin1:

 

[D_Gregg_Ghorian]

Has anyone ever done the actual kit?

 

[Hoss]

Don't be getting greedy there Hoss...:wink:

I suppose we could share.

 

[molotovmuffin]

I suppose we could share.

HA!... Maybe...depends...Naaa...I'm greedy :wink:

Calboner......

PLAEEEEZE! :wink: :wink: :wink:

 

[Hoss]

HA!... Maybe...depends...Naaa...I'm greedy :wink:

Greed can be good as long as I get the best.

 

[Calboner]

HA!... Maybe...depends...Naaa...I'm greedy :wink:

Calboner......

PLAEEEEZE! :wink: :wink: :wink:

To judge from the reports posted by members who have tried, it would require assistance wink:

i did it i used the clone-a-willy kit. its quite a complicated process really. well not complicated but every thing has to be done on time and unless you have "help" to stay hard then it will be quite difficult. first you gotts cut the tube that the kit comes in to size, about an inch and a half longer than your cock. then you gotta heat up some water to body temp (there is a thermometer in the kit) then you gotta get hard. and then, and only then should you start mixing the moulding powder. you have 2minutes from starting to mix it till you have to have it on your cock. this is the tricky bit so i used a cock ring and had help from my fiance but even then i wasnt fully hard at the end of the 2minutes. so you gotta stay hard for another two minutes at least when you insert your cock. do this over a plastic sheet or something cos its quite messy. remove your cock and then leave it stand for 24 hours. the mould shrinks by about 5% id say and then you gotta empty out any excess water and add the silicone mix and the vibrating unit. and after another 24 hours you should be ready to remove your replica cock. it is shorter and thinner than the actual cock and the vibrating unit is not that strong either. oh and you gotta shave off any imperfections and air bubbles formed. and it fucking stinks to high heaven but all in all she enjoys it.

I tried it and it was horrible. Dont waste your money. With 2 people it didnt work. The container was too small, the material solidified even before your dick got in it(less then 5 seconds). Yeah save about the 50 dollars..

I did this for an Ex-gf when I was with her. I had to try twice because I didn't follow the directions completely and it hardened too fast. My suggestion is to use a cock ring, and have someone suck you off while you make it (makes it more fun and keeps you hard for long enough) some places sell enough for over average men (I am 7 3/4 and kinda thick and it molded everything plus my balls)

Make Your Own Dildo Kit - FREE SHIPPING - Make A Dildo Kit, Vibrating Adult Sex Toy, fun, hot, sensual experience.

This is the mold I used, will accomodate up to 11" penis and curved ones. Also it has a large mouth for the balls to also get molded.

Hope everyone gets the penis they want!

I tried the clone a bone kit, or something, a while ago. I was going to make one for my girlfriend when i went away for a long time. the kit came with enough mix for the mold for three tries, and i couldnt get it. The temp of the water you mix it with is CRUCIAL. too hot, and it gelled instantly and didnt mold right. too cold, and it took forever to gell and I lost my wood. she wasnt much help. It cost nearly a c-note, so I was unhappy, but i might buy some mix and try again someday. Just make sure you have a thermometer for the water, but be advised, its not easy, and you WILL need help, which is wierd.

These are all taken from different threads. There are others.

Also, there is a video on YouTube of one chap's experience using Clone-a-Willy: http://www.youtube.com/watch?v=Z3fAjLhedPg

 

[molotovmuffin]

Would you like my assistance or do you have someone in mind? :wink:

 

[RawDog]

RawDog's of course :biggrin1::tongue:.

Awww. A clone-a-willy is nothing without the mindfuck though. Could we throw in a clone-a-handcuff, nipple clamps and blindfold too?

Has anyone ever done the actual kit?

I have and it is a royal bitch to do one. First you have to get the erection. Then you have to quickly prepare the mix because once the mix is prepared it starts to set. After that, pour the mix into the tube and stick your dick in there. It's cold and gooey and you're erection is supposed to stay at 100% rock hard for a few minutes.

Ugh. Failed twice to boot. Someone mentioned using a cock ring. I might try that if I'm ever inspired to do that again.

 

[B_subgirrl]

Awww. A clone-a-willy is nothing without the mindfuck though. Could we throw in a clone-a-handcuff, nipple clamps and blindfold too?

Oh please do! I want the whole clone-a-RawDog kit :biggrin1:.

I have and it is a royal bitch to do one. First you have to get the erection. Then you have to quickly prepare the mix because once the mix is prepared it starts to set. After that, pour the mix into the tube and stick your dick in there. It's cold and gooey and you're erection is supposed to stay at 100% rock hard for a few minutes.

Ugh. Failed twice to boot. Someone mentioned using a cock ring. I might try that if I'm ever inspired to do that again.

Viagra might work.