Pumping Balls

I wonder if there is a way to pump your balls to get real low hangers that look normal. I didn't look at all the ball pumping pictures but the ones I did look at appeared freakish.
I have a big set of low hangers and pump on a regular basis, in my Bull Master, yes when I am through and pull out the nuts are tight and bigger than a grapefruit, but by the end of the day they release and look normal, they are NOT I can assure you, at least twice the size of normal, and the hang can be 8-10 inches, but would look nothing but huge and hangin to anyone who saw them.
 
I have a big set of low hangers and pump on a regular basis, in my Bull Master, yes when I am through and pull out the nuts are tight and bigger than a grapefruit, but by the end of the day they release and look normal, they are NOT I can assure you, at least twice the size of normal, and the hang can be 8-10 inches, but would look nothing but huge and hangin to anyone who saw them.
How long do you pump each day?
 
How long do you pump each day?
At least an hour seldom anymore, but always with a rubber cock ring and another around my sack as high up as I can get it, and always in the Bull Master. My cock does not get the max size that I would get in a tube, maybe half the size, but it rocks my nuts no question.
 
  • Like
Reactions: bulgebigger
I've been pumping on a very modest scale for some years, and have a battery-powered pump with cylinder labelled California Exotic novelties! The internal diameter of the cylinder is 2.5 inches, and there is about 9 inches usable length inside. I never get anywhere remotely near the end but can just about get my cock and scrotum into it. I'd like to concentrate more on my scrotum and the Bull Master seems to be the thing, but they don't seem to be available any more. Is there anyone who sells secondhand ones perhaps?
 
  • Like
Reactions: bigguy19161
I've been pumping on a very modest scale for some years, and have a battery-powered pump with cylinder labelled California Exotic novelties! The internal diameter of the cylinder is 2.5 inches, and there is about 9 inches usable length inside. I never get anywhere remotely near the end but can just about get my cock and scrotum into it. I'd like to concentrate more on my scrotum and the Bull Master seems to be the thing, but they don't seem to be available any more. Is there anyone who sells secondhand ones perhaps?
I Googled Bull Master cock pumps and there were many responses. This link may be helpful. Cheers!

Buy this BullMaster 357 Contoured Shaping Cylinder at Pumptoys.Com
 
I am a former pumper and have posted many photos on the "Biggest pumped dick" and Silicone Hall of Fame" threads. Another member suggested that I post a couple of my pumped ball photos here. These are not me, but may provide some inspiration for aspiring ball pumpers. First photo has no ID, however, the others are of the amazing Matt Redbear. Stay safe. Cheers!

View attachment 32182531 View attachment 32182551 View attachment 32182561 View attachment 32182571 View attachment 32182581
Fucking hot! I love how you twitched and lifted the nuts in that one picture. Ultra sexy
 
Was thinking of starting to pump my balls. Here is the all natural view. Wondering how big I could get.
Cute and sexy. I think they’re sexy just as they are. :). But I also think they’d look hot all expanded from pumping! Sexy either way!
 
  • Like
Reactions: bigguy19161
Thank you for ssending that. I'd found it too but it's said much the same for a very long time now, so I don't think there are actually any available.
Hey Joe. You are most likely aware of Newart, but if not, their forum is a great place to get information, ask questions, and share with other pumpers, etc. Sign up is free. I hope that you find the gear that suits you. Cheers!

forums.newart.com - Index page

FYI...this is old news, but it does appear that the BullMaster is continually out of stock. You are not alone in your search.

Will The BullMaster Magnums Ever Be Back In Stock - forums.newart.com
 
Last edited:
Hey Joe. You are most likely aware of Newart, but if not, their forum is a great place to get information, ask questions, and share with other pumpers, etc. Sign up is free. I hope that you find the gear that suits you. Cheers!

forums.newart.com - Index page

FYI...this is old news, but it does appear that the BullMaster is continually out of stock. You are not alone in your search.

Will The BullMaster Magnums Ever Be Back In Stock - forums.newart.com
Thank you very much for this. It looks as though the last time somebody actually got one was about 2002... so over 20 years ago! Think I might give up!
 
  • Like
Reactions: bigguy19161
That's when I got mine. They are great guys there, even customized mine, they all used to come 9 inches stock and they gladly cut mine down to eight. I would have never filled it up and the extra inch just added weight that was not needed. I am not sure they are really ever going to make anymore, I think they are sticking with the .357 and honestly I would not mind having one of those either.
 
  • Like
Reactions: bigguy19161
Hey Pumpers. I am looking for a ball pump cylinder that comes apart. I am using a big mason jar with a 3.5" diameter mouth and sometimes it takes 10 minutes to get out of it. I cannot recall what those clamshell types are called. Mr Google didn't help so I am hoping you can